View MB506_1274555.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Sept. 1995 Edition 3.0a DATA SHEET
MB506 ULTRA HIGH FREQUENCY PRESCALER
ULTRA HIGH FREQUENCY PRESCALER
The Fujitsu MB506 is a high frequency, up to 2.4GHz, prescaler used with a frequency synthesizer to form a Phase Locked Loop (PLL). It will divide the input frequency by the modulus of 128 or 256 and the output level is 1.6V peak to peak on ECL level.Operation in the 1.6GHz range meets the specification for applications in Direct Broadcasting Satellite Systems (DBS), CATV systems, and UHF Transceivers.
PLASTIC PACKAGE DIP-08P-M01 FEATURES
S High Frequency Operation S Power Dissipation S Wide Operation Temperature S Stable Output Amplitude 2.4GHz max. 90mW typ. -40C to +85C VOUT = 1.6Vp-p
PLASTIC PACKAGE FPT-08P-M01
S Complete PLL synthesizer circuit with the Fujitsu MB87006A, PLL synthesizer IC S Plastic 8-pin Standard Dual-In-Line Package or Flat Package
IN 1 2 TOP VIEW 3 4 8 7 6 5 IN NC SW2 GND
PIN ASSIGNMENT
ABSOLUTE MAXIMUM RATINGS (See Note)
Rating Supply Voltage Input Voltage Output Current Storage Temperature
Note:
VCC
Symbol VCC VIN IO TSTG
Value -0.5 to +7.0 -0.5 to VCC 10 -55 to +125
Unit V V mA C
SW OUT
Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional operation should be restricted to the conditions as detailed in
This device contains circuitry to protect the inputs against damage due to high static voltages or electric fields. However, it is advised that normal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit.
Copyright E 1995 by FUJITSU LIMITED and FUJITSU MICROELECTRONICS
MB506
the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
DQ
Input Buffer IN IN SW
DQ CQ
DQ CQ
CQ
SW
DQ CQ
DQ CQ
DQ CQ
DQ SW CQ
DQ SW CQ
Output Buffer OUT
SW1 H L H L Note:
SW2 H H L L
Divide Ratio 1/64 1/128 1/128 1/256
H = VCC, L = open
Figure 1. MB506 Block Diagram
PIN DESCRIPTION
Pin Number 1 2 3 4 5 6 7 8 Symbol IN VCC SW1 OUT GND SW2 NC IN Input Power Supply Voltage Divide Ratio Control Input Selecting Divide Ratio (See Divide Ratio Table) Output Ground Divide Ratio Control Input Selecting Divide Ratio (See Divide Ratio Table) No Connection Complementary Input Function
2
MB506
RECOMMENDED OPERATING CONDITIONS
Value Parameter Supply Voltage Output Current Ambient Temperature Load Capacitance Symbol Min. VCC IO TA CL -40 4.5 Typ. 5.0 1.2 +85 12 Max. 5.5 V mA C pF Unit
ELECTRICAL CHARACTERISTICS
(Recommended operating conditions unless otherwise noted.)
Value Parameter Supply Curent Output Amplitude Symbol ICC VO with input coupling capacitor 1000pF TA = -40C to 85C TA = -40C to 60C 1.0 100 100 -16 -4 VCC -0.1 VCC Open Conditions Min. Typ. 18 1.6 2200 MHz 2400 5.5 dBm 5.5 VCC +0.1 V V Max. mA Vp-p Unit
Input Frequency
fIN
Input Signal Amplitude High Level Input Voltage for SW Low Level Input Voltage for SW
Note: *Design Guarantee
PIN VIHS* VILS
fIN = 100MHz to 1.3GHz fIN = 1.3MHz to 2.4GHz
MINIMUM INPUT SIGNAL AMPLITUDE (MVp-p)
1000 800 600 400 VCC = 5.0V TA = 25C
200 0 100 200 500 1000 2000 INPUT FREQUENCY (MHz) 5000
Figure 2. Input Signal Amplitude vs. Input Frequency
3
MB506
PACKAGE DIMENSIONS
8-LEAD PLASTIC DUAL-IN-LINE PACKAGE (CASE No.: DIP-08P-M01) 8-LEAD PLASTIC FLAT PACKAGE (CASE No.: FPT-08P-M01)
) .010 .250 - .008 ) 0.25 6.35 - 0.20 .244+.010 (6.20+0.25) .300(7.62)TYP .002(0.05) MIN (STAND OFF) View "A" .008(0.2) .010+.02 (0.25+0.5) INDEX .307+.016 (7.8+0.4) .209+.012 (5.30+0.25) ) .016 .268 - .008 ) 0.40 6.80 - 0.20 .020(0.5) .007(0.18) MAX .027(0.68) MAX
15 MAX INDEX
) .014 .035 - .012 ) 0.35 0.89 - 0.30
) .016 .370 - .012 ) 0.40 9.40 - 0.30
.020+.008 (0.5+0.2) .100(2.54)TYP .050(1.27) TYP .172(4.36)MAX .085(2.15)MAX .018+.004 (0.45+0.10) ) .002 .006 - .001 ) 0.05 0.15 - 0.2
) .012 .039 - 0 ) 0.3 0.99 - 0
.020*0.51) MIN .018+.003 (0.46+0.08) ) .012 .060 - 0
.118(3.0)MIN .0315+.008 (0.8+0.2)
A ) 0.3 1.52 - 0
Dimensions in inches (millimeters)
Dimensions in inches (millimeters)
E1987 FUJITSU LIMITED D08006S-2C
E1987 FUJITSU LIMITED F08002S-2C
All Rights Reserved. Circuit diagrams utilizing Fujitsu products are included as a means of illustrating typical semiconductor applications. Complete information sufficient for construction purposes is not necessarily given. The information contained in this document has been carefully checked and is believed to be reliable. However, Fujitsu assumes no responsibility for inaccuracies.
The information contained in this document does not convey any license under the copyrights, patent rights or trademarks claimed and owned by Fujitsu. Fujitsu reserves the right to change products or specifications without notice. No part of this publication may be copied or reproduced in any form or by any means, or transferred to any third party without prior written consent of Fujitsu.
FUJITSU LIMITED
For further information please contact:
Europe
FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10, 6072 Dreieich-Buchschlag, Germany Tel: (06103) 690-0 Telex: 411963 FAX: (06103) 690-122
Japan
FUJITSU LIMITED International Marketing Div. Furukawa Sogo Bldg., 6-1, Marunouchi 2-chome Chiyoda-ku, Tokyo 100, Japan Tel: (03) 3216-3211 Telex: 781-2224361 FAX: (03) 3215-0662
Asia
FUJITSU MICROELECTRONICS ASIA PTE LIMITED 51 Bras Basah Road, Plaza By The Park, #06-04 to #06-07 Singapore 0719 Tel: 336-1600 Telex: 55573 FAX: 336-1609
North and South America
FUJITSU MICROELECTRONICS, INC. Integrated Circuits Division 3545 North First Street San Jose, CA 95134-1804, USA Tel: 408-922-9000 FAX: 408-432-9044
(c)FUJITSU LIMITED 1990
Printed in Japan PV0050-902A3
4

▲Up To Search▲

Price & Availability of MB506

	To Download MB506 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .